Installation Instructions
Before using our stroller, carefully read the maintenance manual.
Stroller assembling/disassembling
Unbox this stroller’s frame and put it horizontally on the floor. Disable the lock against accidental unfolding. Pull upwards vigorously till the system is secured, while holding the handle (you should hear a specific sound). Press the button on the right lever arm of the frame to fold the frame. After that, simultaneously pull the lever arms on both sides of the frame all the way in. Next, slightly push the frame down to restore it to the initial position it had at the moment of unfolding the stroller. For easy and efficient use, through the same sequence of operations, the frame can be folded together with the seat without taking the seat unit off the frame. This is upon the condition that the seat is facing in the direction of travel, the footrest is in the lowest position, the hood is folded, and the stroller’s handle is turned down.
Installation and removal of rear wheels
Before installing a wheel, insert the axis into the respective spot at the bottom of the frame (until you hear a distinctive sound). The wheel should be installed on the axis, then pull it off slightly until you hear a distinctive click. The wheel can be removed both with and without the axis. Press the button at the bottom of the frame to remove the wheel with the axis. To remove the wheel without the axis, push the middle part of the wheel and drag it along the axis until it comes off completely.
Installation/removal of the front swivel wheels/lock
The frame of the stroller is equipped with two front swivel wheels that rotate at 360°. To fit the front wheels, the wheel axle must be installed in the appropriate position on the frame and pushed up until the system is fixed. In order to remove the wheel, press the button. The wheel is automatically disconnected. If you need to fix the swivel wheel system, press the button above the wheel. Additionally, for convenience and efficiency, you can lock the wheels by pressing the button by both hand and foot.
M Type
Before using our stroller, carefully read the maintenance manual.
Stroller assembling/disassembling
Unbox this stroller’s frame and put it horizontally on the floor. Disable the lock against accidental unfolding. Pull upwards vigorously till the system is secured, while holding the handle (you should hear a specific sound). Press the button on the right lever arm of the frame to fold the frame. After that, simultaneously pull the lever arms on both sides of the frame all the way in. Next, slightly push the frame down to restore it to the initial position it had at the moment of unfolding the stroller. For easy and efficient use, through the same sequence of operations, the frame can be folded together with the seat without taking the seat unit off the frame. This is upon the condition that the seat is facing in the direction of travel, the footrest is in the lowest position, the hood is folded, and the stroller’s handle is turned down.
Installation and removal of rear wheels
Before installing a wheel, insert the axis into the respective spot at the bottom of the frame (until you hear a distinctive sound). The wheel should be installed on the axis, then pull it off slightly until you hear a distinctive click. The wheel can be removed both with and without the axis. Press the button at the bottom of the frame to remove the wheel with the axis. To remove the wheel without the axis, push the middle part of the wheel and drag it along the axis until it comes off completely.
Installation/removal of the front swivel wheels/lock
The frame of the stroller is equipped with two front swivel wheels that rotate at 360° degrees around the vertical axis. To fit the front wheels, the wheel axle must be installed in the appropriate position on the frame and pushed up until the system is fixed. In order to remove the wheel, press the button. The wheel is automatically disconnected. If you need to fix the swivel wheel system, press the button above the wheel. Additionally, for convenience and efficiency, you can lock/ unlock the wheels by pressing the button by both hand and foot.